This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is the same for all trims.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2014 Buick Encore has a couple of alterations which fluctuate with diverse functions and technologies. Exclusive trim levels have got better engine power. Interior improvements typically involve natural leather covers for seats and better materials for floor coverings, roof top, etc.
Typically, you can find three or five trim levels, and the stock alternative is regarded as the reasonably priced. Therefore, the greatest trim is considered the most high-priced and quite often contains warmed up car seats, superior safety, and infotainment systems. Trim designation is different from a maker to a maker. It may appear to be a one or couple of characters (XL, XLE, or XLS), standing for Platinum or Limited or an alphanumeric mark like QX50 or CX-30.
Sometimes these acronyms have a significance. Looking at our illustration, these stand for Exec versions. Some auto models (especially high end ones) can be presented in one trim, but features are extremely personalized. How else can you learn about the trim of your 2014 Buick Encore? It might be noted somewhere on its windscreen. The trim information will unquestionably be available in an owner's manual or included in the VIN code.
