This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2001 Chevrolet Cavalier has a number of trims which differ with manifold features and gear. Higher trim levels ensure additional comfort. Interior improvements usually involve leather-like material for seats and much better resources for flooring surfaces, roofing, and so on.
Normally, you will find three or 5 trim levels, and the base alternative is considered the most cost-effective. For that reason, the very best trim is easily the most expensive and quite often includes heated up seating, superior protection, and infotainment solutions. Trim designation differs from a producer to a producer. It might seem like a one or set of letters (XL, XLE, or XLS), standing for Platinum or Limited or perhaps an alphanumeric identification like QX50 or CX-30.
Not quite obvious, but these shortcuts have a meaning. In our illustration, these stand for High end versions. Some auto designs (especially deluxe ones) can be offered within a single trim, but functions are really exclusive. How else can you figure out the trim of your respective 2001 Chevrolet Cavalier? It can be designated somewhere on its exterior. The trim information and facts will definitely be around in an owner's guide or in the VIN code.
