This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2012 Chevrolet Cruze has a number of adjustments which differ with a myriad of functions and technologies. Top trim levels ensure extra convenience. Interior updates normally include leather covers for seats and better supplies for floor, roof, etc.
Typically, there are three or 6 trims, and the stock alternative is easily the most reasonably priced. Therefore, the highest trim is considered the most costly and sometimes consists of warmed up seating, innovative protection, and infotainment systems. Trim designation is different from a brand to a company. It can seem like a 1 or set of letters (XL, XLE, or XLS), standing for Platinum or Limited or perhaps an alphanumeric name like QX50 or CX-30.
Typically these shortcuts have a significance. Within our case in point, they are Exec editions. Some auto designs (especially luxury versions) could be offered in a single trim, but specifications are incredibly easy to customize. How else do you know the trim of your respective 2012 Chevrolet Cruze? It might be marked somewhere on its window label. The trim information will certainly be around in an owner's guide or perhaps contained in the Vehicle Identification Number.
Select the year