This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2013 Hyundai Genesis Coupe has a number of modifications which vary with a myriad of features and gear. Higher trim levels leverage better horsepower. Interior improvements normally involve natural leather fabric for seats and better supplies for floor, roofing, and so on.
Generally, you can find 4 or five trim levels, and the basic choice is considered the most cost-effective. For that reason, the greatest trim is considered the most expensive and frequently consists of heated up seats, sophisticated safety, and infotainment techniques. Trim level is different from a producer to a company. It could appear to be a 1 or kind of words (XL, XLE, or XLS), a name like Platinum or Limited or even an alphanumeric mark like QX50 or CX-30.
Sometimes these abbreviations have a significance. In our example, they are Luxurious trims. Some automobile types (especially deluxe ones) can be supplied in a single trim, but functions are extremely individual. How else can you determine the trim of the 2013 Hyundai Genesis Coupe? It can be labeled somewhere on its window label. The trim details will unquestionably be available in an owner's guidebook or perhaps in the Vehicle Identification Number.
Select the year