This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2012 Jeep Compass has a few alterations which differ with particular functions and technologies. Higher trim levels provide extra engine power. Interior improvements usually involve leather-like upholstery for seats and much better materials for flooring, roofing, etc.
Typically, you will find four or six trims, and the base solution is the most cost-effective. As a result, the greatest trim is easily the most high-priced and frequently contains warmed seats, advanced security, and infotainment methods. Trim level differs from a producer to a maker. It may seem like a 1 or set of words (XL, XLE, or XLS), standing for Platinum or Limited or an alphanumeric code like QX50 or CX-30.
Not quite obvious, but these shortenings have a significance. Within our example, these stand for High end editions. Some car types (especially luxury ones) could be offered in just one trim, but functions are very unique. How else can you learn about the trim of your 2012 Jeep Compass? It may be labeled somewhere on its exterior. The trim information will definitely be available in an owner's handbook or within the VIN number.
