This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is the same for all trims.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
It is the same for all trims.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
It is the same for all trims.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2000 Lexus GS 300 has a couple of trims which differ with versatile capabilities and equipment. Exclusive trim levels provide the greater deal of comfort and ease. Interior updates normally incorporate natural leather covers for seats and upgraded components for flooring surfaces, roofing, and so on.
Typically, there are three or six trim levels, and the standard choice is regarded as the cost-effective. As a result, the greatest trim is considered the most high-priced and quite often consists of warmed car seats, innovative safety, and infotainment methods. Trim designation is different from a manufacturer to a producer. It may look like a one or set of words (XL, XLE, or XLS), a name like Platinum or Limited or perhaps an alphanumeric name like QX50 or CX-30.
Not quite obvious, but these shortcuts mean something. Within our illustration, they are Deluxe trims. Some car versions (especially luxury types) may be offered in a single trim, but characteristics are really exclusive. How else can you figure out the trim of your 2000 Lexus GS 300? It may be marked somewhere on its windshield. The trim info will surely be available in an owner's guidebook or within the Vehicle Identification Number.
