This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2014 Mercedes-Benz CLA-Class has a few modifications which vary with particular characteristics and equipment. Higher trim levels can boast of better engine power. Interior updates normally incorporate leather-like fabric for seats and much better materials for flooring surfaces, roofing, and so on.
Usually, you will find 4 or five trims, and the standard solution is regarded as the reasonably priced. Consequently, the very best trim is easily the most high-priced and often involves warmed up seating, innovative security, and infotainment methods. Trim level differs from a manufacturer to a producer. It can appear to be a one or set of words (XL, XLE, or XLS), standing for Platinum or Limited or perhaps alphanumeric labels like QX50 or CX-30.
As a rule these shortcuts have a meaning. In our case in point, these are typically Luxury models. Some car versions (especially luxury types) may be presented within a single trim, but functions are really unique. How else can you determine the trim of the 2014 Mercedes-Benz CLA-Class? It might be designated somewhere on its exterior. The trim information will definitely be around in an owner's handbook or even included in the VIN number.
Select the year