This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2016 Mercedes-Benz GLE-Class has certain trims which vary with particular characteristics and gear. Top trim levels provide additional ease and comfort. Interior updates generally incorporate leather upholstery for seats and upgraded components for floor coverings, roofing, etc.
Typically, there are four or six trim levels, and the standard choice is easily the most inexpensive. For that reason, the very best trim is the most expensive and quite often consists of warmed up chairs, innovative security, and infotainment techniques. Trim designation differs from a maker to a maker. It might appear to be a one or couple of characters (XL, XLE, or XLS), standing for Platinum or Limited or even an alphanumeric identification like QX50 or CX-30.
As a rule these shortcuts have a significance. Within our instance, they are Exec editions. Some auto models (especially luxurious types) might be offered within a single trim, but capabilities are really individual. How else can you check out the trim of your own 2016 Mercedes-Benz GLE-Class? It can be labeled somewhere on its windscreen. The trim info will certainly be around in an owner's guide or included in the Vehicle Identification Number.
Select the year