This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is the same for all trims.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
It is the same for all trims.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
It is the same for all trims.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2002 MINI Cooper S has certain alterations which may be different with particular functions and gear. Top trim levels have better horsepower. Interior improvements typically involve leather-like covers for seats and premium supplies for floor, roof top, and so on.
Normally, you will find 3 or 6 trim levels, and the base solution is the most cost-effective. For that reason, the very best trim is considered the most pricey and sometimes contains warmed up seating, innovative security, and infotainment solutions. Trim level differs from a maker to a producer. It could appear to be a 1 or couple of words (XL, XLE, or XLS), a name like Platinum or Limited or an alphanumeric identification like QX50 or CX-30.
As a rule these shortenings have a significance. Within our example, they are Executive editions. Some car types (especially high end versions) may be presented within a single trim, but features are really individual. How else can you learn about the trim of your respective 2002 MINI Cooper S? It might be noted somewhere on its window label. The trim details will surely be around in an owner's manual or even within the Vehicle Identification Number.
