This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is the same for all trims.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
It is the same for all trims.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
It is the same for all trims.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2009 MINI Cooper S has certain adjustments which vary with assorted capabilities and technologies. Higher trim levels can boast of additional ease and comfort. Interior enhancements typically include leather-based material for seats and upgraded materials for floor, roof top, etc.
Normally, you will find 4 or 6 trim levels, and the standard alternative is regarded as the inexpensive. As a result, the highest trim is considered the most expensive and often includes heated chairs, innovative safety, and infotainment techniques. Trim level is different from a producer to a producer. It may appear like a one or couple of words (XL, XLE, or XLS), standing for Platinum or Limited or an alphanumeric mark like QX50 or CX-30.
As a rule these acronyms have a significance. Looking at our instance, these are Luxury models. Some automobile models (especially luxurious versions) could be supplied in just one trim, but specifications are very unique. How else do you know the trim of your respective 2009 MINI Cooper S? It could be labeled somewhere on its window sticker. The trim information will certainly be available in an owner's manual or perhaps in the Vehicle Identification Number.
