It is the same for all trims.
This parameter shows the volume of fuel and air that can be pushed through a car's cylinders and is measured in cubic centimetres (cc) or litres (L).
It is the same for all trims.
Car engine types are usually described according to two attributes: the layout of the engine and the configuration of its cylinders. Layout type means the cylinder arrangement: straight, enline, flat, v-type. Configuration means the amount of cylinders in the engine: two, three, four, five and above.
It is the same for all trims.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum power (number of horsepower) is reached.
It is the same for all trims.
It is a parameter that shows the number of engine crankshaft revolutions at which the maximum torque is reached.
It is a ring-shaped component that surrounds the wheel rim to transfer the vehicle load from the axle through the wheel to the ground and provide traction to the surface over which the wheel travels.
It is the same for all trims.
The standard car seat is designed to support thighs, the buttocks, lower and upper back, and head support. The front driver and passenger seats of most vehicles have three main parts: the seat back (squab), seat base (cushion), and the head-rest.
It is a propulsor, a freely rotating disc, or a disc fixed on a rotating axis, which allows a body placed on it to roll rather than slide.
It is the same for all trims.
The drive type indicates to which axis the torque from the motor is transmitted. There are three types of drive - front, rear, and all-wheel drive. In front-wheel drive cars, the torque is transmitted to the front axle, and in rear-wheel drive cars, it is transmitted to the rear axle. In case of all-wheel-drive cars, the energy is applied evenly to both axles.
This parameter shows the distance, measured in miles, that a car can travel per gallon of fuel in a city traffic.
This parameter shows the distance, measured in miles, that a vehicle can travel per gallon of fuel driving on a highway.
2020 Nissan Versa has certain trims which differ with a myriad of characteristics and equipment. Higher trim levels ensure extra comfort and ease. Interior improvements usually consist of leather-like covers for seats and upgraded supplies for flooring surfaces, roofing, and so on.
Usually, you can find four or five trim levels, and the base option is easily the most cost-effective. Consequently, the greatest trim is the most expensive and frequently contains heated car seats, innovative basic safety, and infotainment methods. Trim level differs from a manufacturer to a company. It may appear like a one or couple of words (XL, XLE, or XLS), an identity like Platinum or Limited or even an alphanumeric mark like QX50 or CX-30.
As a rule these shortenings have a significance. Within our instance, these are generally Exec editions. Some auto models (especially luxury ones) can be offered in just one trim, but specifications are very individual. How else can you learn about the trim of the 2020 Nissan Versa? It can be noted somewhere on its windscreen. The trim information will unquestionably be available in an owner's guidebook or perhaps in the VIN code.
